Zoom level:
image
image

WIRELESS SOLUTION, S-1 INDOOR, Wireless transmitter

Manufacturer

WIRELESS SOLUTION

Model number

S-1 INDOOR

Do you want this product?

Contact-us >

Description

The W-DMX BlackBox range represents thepinnacle of wireless engineering excellence applied to the control of lighting systems.

Features

DMX interface Full compliance with USITT DMX-512 (1990) & 512-A standards Maximum number of transceivers on a single bus: (compliant with the EIA/TIA RS-485 standard) Data Rate: 250 kbps (slew rate limited to minimise EMI) Electrostatic discharge protection: ±15kV DMX frame rate and frame size: Auto sensing Frame rate: 1 (min) to 44 (max) frames per second Frame size: 1 (min) to 512 (max) channels Loss of DMX input or radio link: After one second (if there is no resumption), the DMX output will cease to transmit and go into a high impedance mode. Recovery from loss of DMX input or radio link: Less than 1 second. Power characteristics High voltage input: 90-260VAC Low voltage input: 12VDC (T-1 Pro and S-2: 12-24VDC) Average current (transmit mode): 450mA @ 12VDC Average current (T-1 receive mode): 200mA @12VDC Battery operation (T-1 Pro only) 1 hour operation from fully charged in transmit mode 2 hours operation from fully charged in receive mode RF characteristics W-DMXTM uses Adaptive Frequency Hopping Spread Spectrum (AFHSS) and changes frequency every 910uS Operational frequency range: 2402-2479MHz (ISM band) EU/ASIA RF output power: 20dBm or 100mW FCC RF output power: 25dBm or 275mW Channel bandwidth: 1 MHz Sensitivity at 0.1% Packet Error Rate: 95dBm Tested link range 450m (Low power EU mode using standardantennae in an urban area) Approvals FCC: 15.247&68 Class B; Canada ICES 003; Japan ARIB STD-T66 CE; EN 301 489-1; 301 489-17; EN 300-328-1; EN 300-328-2; EN 609 50 Enclosure Diecast aluminium casing Operating temp range: S-1 / S-2: 0oC to +55oC (32oF to 131oF) T-1 Pro: -20oC to +55oC (-4oF to 131oF) Dimensions (W x H x D): 219 x 45 x 131mm (8.6” x 1.8” x 5.2”) Weight: 1005g / 35.45oz Connectors N-type female antenna connector, N – RP-SMA adaptor included 2 Neutrik® XLR 5-pin gold plated DMX connectors 2 RJ45, DMX over Cat5 cable links 1 RJ45, W-DMX PC-link / Internal link (T-1 Pro only) 1 DC input, pluggable terminal strip, Phonix® MSTB 2,5 1 AC input, IEC-6C Supplied accessories AC power cord / DC power connector / Standard antenna Antenna adaptor / Mounting brackets / User guide